EasyManua.ls Logo

Arlec CL24 User Manual

Arlec CL24
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions for CL24
CL24 is a battery operated LED lantern
which gives excellent light output and a long
operating time from the sealed lead/acid
batteries within.
There are two operating modes which have
1. high light output, and
2. a reduced output which extends the
operating time
The operating switch activates these modes by
successively pressing the operating button.
First press – Maximum output
Second press – reduced output
Third press - Off
CL24 has a handle for carrying, which includes
a pivoted hook to hang the lantern, and a
compass for direction finding.
It is recommended that the battery be charged
before first using the lantern, to ensure that the
battery is fully charged
Battery Charging Directions
The internal long life batteries are ideally to be
kept charged to preserve the battery capacity
and life.
During periods of inactivity it is essential
that the charging cycle be performed at least
monthly to ensure that the lead/acid batteries
do not permanently deteriorate due to internal
chemical reactions.
Charging can be performed by either activation
of the internal charging circuit from the mains
power supply or from a 12V vehicle accessory
outlet.
Simply plug in the connector at the end of the
Plug pack output lead, or the similar plug on the
vehicle accessory lead, to the charging socket
on the lantern.
The charging socket is located beneath the
operating switch.
Note: the lantern cannot be operated when the
charging cycle is being performed.
There is an indication of “Charge in progress”
by a red indicator located above the operating
switch.
When charging is complete this indicator will
no longer be illuminated, and the lantern is
again ready for use.
When charging the battery using the mains
supply adaptor it is advisable to allow an
overnight charging period. The mains adaptor
will not overcharge the battery since it will
automatically terminate charging when the
battery is fully charged.
Similarly the vehicle accessory lead can be
connected to the lantern until the charge
indicator is extinguished.
With due care and regular charging your
CL24 will give years of excellent service.
24
LED
RECHARGEABLE
CAMPING
LANTERN
CL24
CPIN002263
CL24_ CPIN00263.indd 1 30/11/11 11:16 AM
Question and Answer IconNeed help?

Do you have a question about the Arlec CL24 and is the answer not in the manual?

Arlec CL24 Specifications

General IconGeneral
ModelCL24
CategoryLantern
Power SourceBattery
Battery TypeD
Battery Quantity3
Light Output240 lumens
MaterialPlastic
Bulb TypeLED

Summary

Operating Instructions for CL24

Operating Modes

Details the two operating modes: high light output and reduced output for extended operating time.

Handle and Compass Features

Explains the lantern's handle, including its pivoted hook and integrated compass for directional finding.

Battery Charging Directions

Charging Procedure and Connections

Guides on connecting the lantern to mains or 12V accessory outlets for charging.

Charging Indicator Light

Describes the red indicator light that signals charging progress and completion.

Charging Recommendations and Best Practices

Recommends overnight charging and monthly cycles to preserve battery life.

Product Warranty Information

Arlec Warranty Terms

Details Arlec's 12-month warranty against defects in materials and workmanship.

Warranty Claim Process

Outlines the process for returning the product and providing proof of purchase for warranty claims.

Consumer Rights and Guarantees

Explains consumer rights under the Australian Consumer Law, including refunds and repairs for major failures.

Sales and Warranty Enquiries

Arlec Contact Details

Provides contact details for Arlec Australia Pty. Ltd. for sales and warranty inquiries.