User’s manual
28
● Input method applications ：After installing input methods,you need to select this
method in"setting"—"language and keyboard",then the pc will change to the input
method you install,the one you didn’t select will not list in the "choose input method"
(input option),for example,the "sogou input method" will not list in input method
option,you can’t use it at this time：
● USB drive installation ：
1 ：Insure your pc power off,then connect computer with usb cable.
2 ：Long press“menu”and “power”button at the same time to start pc,you will see the
pc start and have below information " fastboot update the system focus mid device
-000",the pc will have" android 1.0 " dialog box turn up, select"install from the list or
assigned location（ senior ）, and then click the next ,as follows:
3：In the following dialogue box and select” Include this location in the search”, and
then click browse button,as follow ：
4： Assigned USB driver location, click”confirmation”, and then click the next,as follow：
5：After install driver complete, and then click”finish” , as following diagram ：
6：The pc will popup“ android bootloader interface" new hardware install instruction, as follow：
7：The same install step as above,after finish install,open the computer equipment
management of the pc,it will have device information"android bootloader interface
" ,that’s to say this device driver program install successfully ,as following
diagram：
To Next Page
Loading...