HOW TO INSTALL:
Double Sided Mounting Tape:
Be sure to align the EZ-
Shelf™. Open the EZ-Shelf™
and begin screwing in (2)
“Mounting Screws” through of
the inside of the EZ-Shelf™.
(See Figure 1)
FIGURE 1:
FIGURE 2:
FIGURE 3:
1
Move the tray forward and
use another (2)“Mounting
Screws” to mount to the
surface underneath the
cabinet. (See Figure 2)
If the EZ-Shelf™ does not
sit flush and is difficult to
operate due to the depth of
the cabinet space consider
using the Long Handle or a
combination of “Spacers”.
(See Figure 4)
NOTES:
NOTE:
2
(OPTIONAL) Double Sided
Mounting Tape is included if
you wish to not drill into the
surface under the cabinet .
There are double sided tape
indicators on the EZ-Shelf™
and the Spacer with Cabinet
Mounting.
(See Figure 3)
It is recommended to use
either Mounting Screws or
Double Sided Tape during
install.
Spacer with Cabinet Mounting
EZ-Shelf
To Next Page
Loading...