ARM Perfect Pod EZ-Shelf - Spacer and Handle Options Explained; Extended Spacer Configuration; Installing Handle Options

HOW TO AND INSTALL HANDLE OPTIONS:
Place the desired handle
in the correct position on
the bottom of the tray and
attach the Handle Screw
using the Handle Tool from
the top of the tray to the
desired handle.
(See Figure 5)
Install spacers with or
without the Spacer without
Cabinet Mounting .
(See Figure 4)
If using Double Sided
Mounting Tape, attach
spacers with Spacer Screws
first than use the Double
Sided Mounting Tape on
the Spacer with Cabinet
Mounting. (See Figure 3 for
double sided tape indicators)
WHY THE SPACERS AND EXTRA HANDLES?
The EZ-Shelf™ is
narrow so it will fit
in even the tightest
environments.
With the included spacers
and two different length
handles, the EZ-Shelf™
can be configured for any
cabinet style.
Cabinets are all
different, so the EZ-
Shelf™ is designed to
be versatile.
Do not over tighten screws
Locking Mechanism will NOT
work until handle is installed.
FIGURE 4:
FIGURE 5:
IMPORTANT:
Short Handle
Handle Screw
Handle Tool
Long Handle (Oponal)
Extended Spacer Option:
Spacer Screws
Spacer Screws
Mounting Screws
Spacer without Cabinet Mounting
Spacer with Cabinet Mounting
EZ-Shelf Tray