Need help?Do you have a question about the Armada Technologies Pro300 and is the answer not in the manual?
Overview of the Armada Technologies Pro300™ wire and valve locator kit and its components.
Instructions for installing the required batteries in the Pro300™ transmitter and receiver units.
Steps to prepare the Pro300™ for tracing wires, including connecting to the wire and ground stake.
Guidance on using the Pro300™ receiver to locate and trace wires by listening for signal nulls.
Methods for locating breaks or severe damage in wires using the Pro300™ by detecting signal loss.
Procedures for locating irrigation system solenoids and valves using direct wire or loop methods.
Tips for improving Pro300™ performance, including ground conditions and signal interpretation.
Details on Armada Technologies' 12-month warranty for manufacturing defects and repair/replacement terms.
General| Input Signal | 4-20 mA |
|---|---|
| Housing Material | Aluminum |
| Supply Pressure | 1.4 - 7 bar |
| Enclosure Rating | IP66 |
| Certification | ATEX, IECEx |
To Next Page