Armada Technologies Pro300 User Manual

2
Description
The Armada Technologies Pro300™ wire and valve locator is
designed to find lost valves and broken or severely damaged wires,
and trace their paths. The complete Pro300™ kit consists of:
 (1) Pro300R Receiving Wand and Antenna
 (1) Pro300T Transmitter, Carrying Case, and Leads
 (1) ProGS1 Ground Stake
 (1) Operating Manual
Please be sure that all items are included before operating the
Pro300™.
Figure 1
Battery Installation
The Pro300™ transmitter requires 8 “C” cell batteries. The Pro300™
receiver requires one 9v battery. To install the batteries in the
Pro300™ transmitter, open the transmitter case and remove the 5
holding screws on the battery compartment located at the upper
center of the unit. Place the batteries in the holder, orienting them
in accordance with positive and negative poles. Turn on the
Pro300T using the red on/off rocker switch. The red LED on the

Armada Technologies Pro300 Specifications

General

Brand	Armada Technologies
Model	Pro300
Category	Valve Positioners
Language	English