To Next PageTo Next Page
Need help?Do you have a question about the ArmorAll AHF9-1002-BLK and is the answer not in the manual?
Press and hold the power button to turn on the unit. It automatically pairs to previously paired devices. Press and hold again to shut off.
Open phone Bluetooth settings, search devices. Power on speaker and hold button to enter pairing mode. Select "AA Speaker ID" on phone.
Screen shows "PAIRING", "-bt-", incoming call numbers, "CALLING", "HANGUP", or "OFF" depending on device status.
Red LED indicates charging status. Red and Blue LEDs blink alternately for pairing. Red LED blinks with sound for low battery.
Details button functions including volume increase, volume decrease, play/pause, answer/end call, and power/pairing.
Lists key specifications such as Bluetooth version, transmission power, operating range, microphone sensitivity, talk time, and standby time.
Details charging voltage, charging current, charging time, and battery type and capacity (5V, 200MA, 5C Lithium Battery, 500 mAH).
Specifies speaker size, available color (Black), weight (83.6g), and overall dimensions (110.2*19.3*43.3mm).
General