Specifications
Armytek Optoloelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed
especially for your needs applying in them components made in USA and Japan. 10 years no-hassle warranty.
Extremely powerful light 1200 lumen with constant brightness during the whole operation time
Effective TIR-optics, which provides flood wide light for close application and for distances up to 80 meters
Reliable and comfortable headband for convenient continuous usage
Compact and light-weight flashlight without loss in reliability and durability
Record runtimes — up to 100 days — and multi-color battery indication for well-timed battery change
Side switch for simple one-hand operation and quick access to the main modes
Complete correspondence to the highest standards of water resistance — submersible to 10 meters
1. Depending on the model, your headlamp can inconsiderably differ from the pictures in the manual.
2. The producer reserves the right to change the package at his own discretion without modifying this
manual.
Initial Service
To set/replace batteries:
1. Unscrew the tailcap.
2. Place the batteries with the positive contact (+)
facing the head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
After placing the battery it is recommended to carry
out the procedure of choosing the battery type through
the built-up headlamp menu. To access the Menu
press and hold the switch button (when the headlamp
is switched off). The headlamp will switch on, go
through the all available modes and then switch off
again. After switching off, release the button quickly
and click it rapidly again. The headlamp will enter the
Menu and the LED will flash about 3 times a second.
We recommend NOT to leave power sources inside the flashlight for a long storage period, as batteries
(especially, non-rechargeable) can leak for various reasons and damage the inner parts of the flashlight. If
you want to keep your flashlight in a stand-by state with batteries in, use new and quality batteries, store the
flashlight in acceptable for batteries operational temperature and revise the batteries' state at least once a
month. If you have noticed any signs of batteries' defects, withdraw them from the flashlight and take out of
operation. It is also recommended to replace discharged batteries with new ones before the storage as the
chance of leakage is higher with discharged batteries.
Set description
Items included in the package:
Headlamp
Headband (two straps)
Silicone holder
2 spare O-rings
Clip
User manual
Born to exceed.
The most technically advanced flashlights in the world.
1.
b.
e.
d.
a.
b.
e.
c.
2.
3.
x
2
To use the light with the headlamp:
1. Connect the secondary strap with the silicone holder (fig.1).
2. Pass the ends of the main strap through the loop of the secondary strap and
slots in the silicone holder (fig. 2b), conjoin them in a ring (fig. 2c). Pass the
loose end of the main strap through the loop of the secondary one in the
opposite direction and fix it in the buckle (fig. 2d).
3. Fix the headlamp in the headband (fig. 3) and adjust the elastic bands to the
size of your head.
Armytek Wizard Pro
USER MANUAL
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
www.armytek.com
The most technically advanced flashlights in the world.
Born to exceed.
Now you can specify the battery type:
1 click for 1 x 18650 Li-Ion battery, default value.
2 clicks for 2 x CR123A lithium batteries.
3 clicks for x RCR123 Li-Ion batteries. 2
After the choice is made the light will flash 1, 2 or 3 times to show the battery type chosen.
c.
Menu
1x18650 Li-Ion
2xCR123A
x2
off
firefly 1
firefly 2
main 1
main 2
main 3
max
x1
2xR123 Li-Ion
x3
To Next Page
Need help?
General