ARO MAC3550C - How To Use The Basic Functions; Temperature Setting and Auto Mode Operation; Cool Mode Operation Guide

6
How To Use The Basic Functions
COOL operation
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the Temp
or Temp button.
3. Press the FAN button to select the fan speed:
AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the unit.
SETTING TEMPERATURE
The operating temperature range for units is 17-
30 °C. You can increase or decrease the set
temperature in 1 °C increments.
AUTO operation
In AUTO mode, the unit will automatically select
the COOL, FAN, HEAT or DRY mode based on
the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the Temp
or Temp button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can’t be set in Auto mode.