6
Page
ASSEMBLING THE ISK
**CAUTION: TWO PEOPLE ARE REQUIRED FOR ASSEMBLY**
Do not remove the foam
bump protection on the unit.
Carefully lay the
ISK on its side.
Unbox your new scenting device. Do
not remove the foam bump protection
on the unit.
Carefully lay the ISK on its side.
While the ISK is being held on its side by one
person, the second person will need to attach
the base-stand to the bottom of the ISK. Secure
the base-stand by using all 12 Socket Cap Screw
with the Allen Key provided.
Attach the Adjustable Level Shoe in the 4 holes
at the bottom corners of the base-stand.
Step 1
Step 3
Step 2
Step 4
To Next Page
Loading...