How to operate the AroMini.
Now that you’ve inserted the fragrance bottle into the diuser and locked the top
and bottom part together, go ahead and plug in the power chord into the wall
outlet. Once connected the green light on the adaptor will lit up to indicate the unit
is powered on.
The dial will allow you to control the intensity of the fragrance output. Turning the
dial all the way down, counterclockwise, will shut it o completely.
Please note the unit works on an interval, 300 sec. ON and 30 sec. OFF. Don’t be
alarmed if the AroMini stops working, it will only be for 30 seconds. This will ensure
you get even scent distributtion and prolong the life of the scent diuser.
Concentration increased from to (yellow being the lowest and red the highest).
Intensity Dial
To Next Page
Loading...
