Shaw HDPVR Box
Installation Instructions (Approximate hardware setup time: 10
-
15 minutes)
C. Screw one end of the included white cable
cord (with silver ends) into your wall cable
outlet and the other end into CABLE IN
on the back of the HDPVR. For an optimal
viewing experience, we recommend using
the included cable cord instead of any others
that you might have around.
A. Your serial number, “Host SN,” is located on the back of the HDPVR (next
to the number 3) and starts with the letter “M.” Alternatively, you can find the
serial number on the white sticker label on the HD box packaging. You can find
your Account number on the mailing label.
What’s in the box
Hook up your new hardware
B. Find a location to put your new hardware
that will allow it to breathe.
Cable Cord
(Coax)
Shaw Remote ARRIS DCX 3510-M HDPVR Splitter
Power Pack HDMI Cable IR Receiver +
Tether Cord
(Optional Use)
(Optional & not included
in all packaging)
Serial number
To Next Page
Need help?
General