Arris DCX3200 User Manual

Shaw HD Box
Installation Instructions (Approximate hardware setup time: 10
-
15 minutes)
C. Screw one end of the included white cable
cord (with silver ends) into your wall cable
outlet and the other end into the back of the
HD box. For an optimal viewing experience,
we recommend using the included cable cord
instead of any others you might have around.
A. Your serial number, “Host SN,” is located on the back of the HD box (next to
the number three) and starts with the letter “M.” Alternatively, you can find
the serial number on the white sticker label on the HD box packaging. You
can find your Account number on the mailing label.
Wall Outlet
Cable InCable Out
What’s in the box
Hook up your new hardware
B. Find a location to put your new hardware
that will allow it to breathe.
Cable Cord
(Coax)
Shaw Remote Arris HD Box Splitter
Power Pack HDMI Cable IR Receiver +
Tether Cord
(Optional Use)
(Optional & not included
in all packaging)
Serial number

Arris DCX3200 Specifications

General

Brand	Arris
Model	DCX3200
Category	HDTV
Language	English

Summary

Hardware Setup and Connections

Find Serial and Account Numbers

Locate your HD box serial number on the device or packaging and account number on the mailing label.

Optimal Hardware Placement

Position the HD box in a location that allows for proper ventilation and airflow.

Connect Coaxial Cable

Screw the included coax cable into the wall outlet and the HD box for optimal viewing.

HD Box Activation and Remote Setup

Select TV Input

Turn on your TV and select the correct HDMI input used for the HD box.

Check Box Activation Status

The HD box is ready for activation when 'noCP' message displays on its front panel.

Complete Online Activation

Activate your HD box online via myaccount.shaw.ca under TV Equipment Self-Install.

Program Universal Remote

Follow QuickSetup instructions to program your Shaw Universal Remote for TV control.