Arris X-Speed 250B - User Manual

ARRIS X-Speed 250B Assembling Manual
Thank you for purchasing the ARRIS X-Speed 250B FPV Racing drone. Be sure to read through the entire manual before starting your build. If you bought the ARRIS
X-Speed 250B frame, or super combo version, this manual will provide you the necessary information to complete the building with a minimum amount of effort.

Summary

4. Solder ESC and Motor Connections

4.1. Understand Motor Rotation

Learn to solder ESCs to motors, understanding CW and CCW rotation.

5. Mount Motors and ESCs to Arms

5.1. Secure Motors and ESCs

Secure soldered motors and ESCs to the drone arms using screws and adhesive tape.

6. Solder Video TX and Camera to PDB

6.1. Connect Video Components

8. Mount Motor Arms

8.1. Attach Motor Arms

10. Connect ESC and FC Power Cables

10.1. Solder ESC;FC Power

Solder ESC output wires and flight controller power cables, modifying spare wires.

13. Install Flight Controller (FC)

13.1. Solder FC Pins and Install Outer Case

Solder pins to the flight controller and install its outer case as illustrated.

13.2. Mount FC Horizontally and Connect ESCs

Secure the flight controller horizontally using adhesive tape and connect ESC wires, observing polarity.

13.3. Solder Voltage Detection Cable

13.4. Install Buzzer

14. Mount Camera

14.1. Attach Camera

15. Install Radio Receiver

15.1. Mount and Connect Receiver

16. Mount Video TX and Antenna

16.1. Attach VTX and Antenna

18. Install Assembled Upper Plate

18.1. Mount Upper Plate

Arris X-Speed 250B Specifications

General

Brand	Arris
Model	X-Speed 250B
Category	Quadcopters
Language	English