To Next PageTo Next Page
Need help?Do you have a question about the Arrow 1600 and is the answer not in the manual?
Position the heater correctly and align the flue spigot with the ceiling flue location.
Ensure correct model and maintain minimum distances to combustible surfaces.
Install heater in fireplace, connect to chimney, and ensure flue system provides effective discharge.
Specifies fuel types, kindling, start-up wood, and ignition steps for the heater.
Guide for building and loading firewood, adjusting air controls, and fan operation.
Procedures for reloading fuel, safe practices, and preparing for overnight burns.
Methods for cleaning door glass via high firing and curing the heater's high-temperature paint.
Detailed steps for safely removing ash from the firebox and ash pan.
Instructions for dusting, cleaning, and retouching paint surfaces without damage.
Cleaning door glass, checking door glass seal integrity, and adjusting door seals.
Guidance on adjusting the heater door alignment and removing/cleaning the baffle plate.
Annual cleaning of the flue system to prevent creosote buildup and ensure safe operation.
Details warranty periods, covered components, and specific exclusions for the heater.
General| Fuel Type | Wood |
|---|---|
| Heating Area | Up to 1, 600 sq ft |
| Maximum Log Size | 18 inches |
| Ignition Type | Manual |
| Efficiency | 75% |
| Emissions | 2.5 g/hr |
| Finish | Metallic Black |
