Use & Safety Guide
• Steering Assembly including Stub Axles, King Pins, King Pin bearings and Tie Rods
• Brake Assembly including pedal and cables
• Side Pods including Side Pod Bars
All items should be constantly inspected for possibilities such as cracks from fatigue or crash contact,
bending, seizing up, lubrication, normal wear and tear. Ensure all fasteners are tight and securely fastened.
Items showing damage or wear must be replaced.
MODIFICATION
Please note that under no circumstances does our Company authorise or recommend modifications of any
type whatsoever to Go Karts or components we produce. This includes any alternative methods of assembly
of any components. Any such alteration or modification performed is totally and solely the responsibility of
the person/persons carrying out the same.
PROTECTIVE CLOTHING
For your protection and safety when driving a Kart you must always wear the following:
• Approved Safety Helmet
• Goggles
• Driving Suit
• Driving Gloves
• Driving Boots
• Ear Plugs
• Also a neck brace is highly recommended
NEVER wear loose fitting clothes or scarves. If you have long hair, it must be contained in a hair net to
prevent being entangled in any moving parts.
WARRANTY/GUARANTEE
As this is a racing/competition vehicle no Warranty or Guarantee, either written or implied, exists.
NEVER drive your Kart on any public highway, freeway, street or road. Doing this is illegal and extremely
dangerous. If you decide to resell or pass on your Drew Price Engineering Pty Ltd Kart it is your responsibility
to pass on all the Safety maintenance information to the next owner/operator. In the event of an accident,
failure to pass on this information may mean you are held legally responsible.
Finally, we wish you many hours of fun, excitement and enjoyable racing. These guidelines are to help you
make it as safe as possible.
22 USE & SAFETY GUIDE
To Next Page
Loading...