Crash Bar Adjustment
Crash Bar Adjustment
Problem: “Understeer from the apex and out of the corner”
Solution: Loosen or remove the bolt at the front mounting point of both side-pod
supporting bars to the chassis.
Side Pod Bars:
Have these tightened for most conditions.
Loosening these will reduce grip and can
also assist in reducing understeer.
Rear Crash Bar:
The rear crash bar must always be kept
securely tightened.
Front Crash Bar:
The top bolts securing the front bar with a
rubber spacer are best left firmly tightened
but not over tight. Loosening the front bar
will reduce the front steering/grip.
CRASH BAR ADJUSTMENT 5
To Next Page
Loading...