Chassis, including all welds:
Inspection • • Immediately following
any crash/contact
Cleaning • •
Drive Sprockets:
Inspection • •
Replacement •
Engine: Refer to Owners Manual Maintenance Schedule
Engine Mount Clamps:
Retighten • •
Inspection • Replace after 5
(red nylon inserts) race meetings
Fuel line/Fuel tank:
Inspection (tank) • •
Check inside tank that
fuel pickup has not
come adrift from the
outlet fitting
Inspection (hose) • •
Cleaning (tank) • •
Replacement (hose) • •
Sprocket Hub: • • Lubricate threads
Steering System:
Inspection 1 • •
(movement)
Inspection 2 • • Immediately following
(damage) any crash/contact
Retighten • •
King Pins • • Must be tight, but do
not overtighten.
Replace if movement
of stub on king pin
is evident
Inspection • Replace if worn
(tie rod ends)
Rear Bumper:
Inspection • •
Retighten • •
Wheels/Tyres:
Air pressure • •
Inspection (wheels, • •
inc. bearings)
Inspection • • Lubricate threads
(rear wheel hubs)
Retighten (wheels) • •
Replace (wheels) •
Replace (tyres) •
EVERY RACE MEETING
AFTER
AFTER AFTER 1 MEET 3 MEETS
5 MEETS
1 SEASON
RUNNING
EVERY
or or or
AS
or
ITEM IN RUN 100km 300km 500km REQ’D 1,000km REMARKS
To Next Page
Loading...