Assembly InstructionsOLIVIA Sewing Cabinet Page 12
3. Never move the platform with your sewing machine on the platform. Always remove the machine as
you move the platform up or down.
To adjust the height of the platform in the second position creating a flush surface:
1. Move the platform down into the sewing well as demonstrated in step 1 above.
2. Place your machine in the well. If your machine’s sewing surface (the area on your machine where
your machine’s footrests) is sitting below the edge of the table you will need to raise the platform. If
your sewing surface is sitting above the edge of the table you will need to lower the platform.
Raise Platform
Below Table Edge Above Table Edge
Lower Platform
To Next Page
Loading...