1 Slide rear siding into channel of
corner and splice posts fastening to
rear frame as shown in previous Step
11.
2 Install rear siding to complete each
section of rear wall. Fasten top center
of last siding to rear angle.
3 Slide front siding into channels of
corner post and door jamb. This sid-
ing is fastened from the inside, using
screws into post and jamb.
4 Install front siding to complete
both front sections.
●●
●●
● 8736 Side Siding (6)
●●
●●
● 8737 Front Siding (6)
● Parts Needed For ●
Rear/Front Siding
Step 12
SX25
25
4
STEP
STEP
3
STEP
2
1
Front Panels Fasten at
Corners & Door Jambs
from the Inside
Fasten Top Center of
Last Siding to Stud
8736
8736
8736
Fasten Rear Siding
to Corner & Splice
Posts From Inside
STEP
8737
8737
8737
To Next Page
Loading...
