Art-Tech AT-EG301 User Manual (English)

To Next Page

Gyroscope (AT- EG301)Manual

connect to

tail servo

Picture of control set connection

2. Elevator

1.Aileron

4. Rudder

5. Gyro gain

6. Pitch

3. Throttle

1. Working Voltage : DC 4V-6V

2. Working currency: 40mA

3. Weight: 15g

4. Dimension: 31mm * 31mm * 23mm

Specification

1. Built-in lock mode and standard mode

2. Built-in temperature compensation circuit

3. Multi-gain control adjustment function

4. Gyroscope normal/ reverse direction switch

5. Rudders itinerary adjustment function

Feature

This gyroscope uses digital PID control method. It has a built-in temperature compensation circuit and

thus greatly reduces the impact of temperature change on the midpoint offset. It has two working

modes: locked mode and standard mode. With multi-gain controls and many adjust methods, this

gyro can perform head- lock function easily.It is easy to fit different kinds of helicopters. It is a good

choice for hovering, flying routes, reverse flight and other stunt flying.

Gyro adjustment

6. Gyro signal Connect to Ch4

5. Gyro gain Connect to Ch5

3. Connect to tail servo

2. Gain adjustment

1. Rudder itinerary adjustment

4. Reverse switch for servo

Need help?

Do you have a question about the Art-Tech AT-EG301 and is the answer not in the manual?

Art-Tech AT-EG301 Specifications

General