Do you have a question about the Art DUALXDIRECT and is the answer not in the manual?
Output Connections | 2 x XLR |
---|---|
THD | <0.01% @ 1kHz |
Input Attenuation | 0dB, -20dB |
Input Impedance | 100k Ohms |
Weight | 0.68 kg (1.5 lbs) |
Alerts to dangerous voltage and important operating/maintenance instructions.
Advises on protecting controls, proper lifting, and avoiding environmental hazards.
States that only qualified personnel should perform service and warns against opening the unit.
The DUALXDirect offers two independent active interfaces for connecting various audio signals to mixers.
Features low-noise active electronics, flat frequency response, and high signal handling for clean sound.
Details attenuator, thru jacks, ground lift, and battery/phantom power operation.
Fully active, phantom/battery powered, converts high-impedance to balanced 600 Ohm outputs.
Includes switchable input attenuation (0, -30 dB) and switchable ground lift for noise reduction.
Rugged, extruded aluminum case suitable for live sound, fixed install, and DJ applications.
Connect instrument/line signals to INPUT jacks and use THRU jacks for parallel patching.
Connect balanced line cables from OUTPUTs to audio gear inputs.
Explains 9V battery or phantom power activation and LED indicators for power source.
Guides on using ATTENUATOR for signal strength and GROUND LIFT for noise reduction.
Visual representation of signal flow through inputs, attenuators, phantom/battery power, and outputs.
Details frequency response, THD, dynamic range, channel separation, and input/output levels.
Lists input/thru/output connector types, impedance, attenuation, and power requirements.
Provides unit dimensions in inches and millimeters, and weight in pounds and kilograms.
Details the three-year warranty for workmanship and materials for original US purchasers.
Lists conditions under which the warranty is voided, such as misuse or unauthorized alterations.
Advises verifying power, connections, and cable condition before seeking service.
Outlines steps to request a return authorization number from the website.
Guides on packing the unit, labeling the box, and including necessary contact and purchase information.