14
SPECIFICATIONS
Input Connections XLR female balanced (Mic, channels 1-3)
RCA unbalanced (Line Inputs 1-6, Left & Right)
1/4-inch TRS unbalanced stereo (Bus Inputs, Zone 1 & 2)
Output Connections 1/4-inch TS unbalanced (Zone 1 & 2 Out, Left & Right)
Input Impedance 4k Ohms (Mic), 10k Ohms (Line), 10k Ohms (Bus)
Output Impedance 200 Ohms (Zone 1 & 2)
Frequency Response 20 Hz – 20 kHz (+0, -1 dB) (channels 1-6 in, zone out)
THD <0.01% @ 1 kHz, typical
Phase Response All connections are phase coherent
Signal to Noise Ratio >90 dB typical (Ref 0dBu)
CMRR >43 dB typical
Maximum Input Level -4 dBu, +16 dBu with 20 dB pad (Mic), >25 dBu (Line)
Maximum Output Level +20 dBu (unbalanced)
Maximum Gain 57 dB (Mic), 31 dB (Line)
Ducking Threshold -49.5 dBv (adjustable via rear-panel dipswitches)
Ducking Depth 15 dB
Tone Controls +/-12 dB @ 100 Hz & 10 kHz
Phantom Power Switch selectable, +48V DC (regulated and filtered),
7 mA current limiting per leg
Power Requirements USA: 85-125 VAC, 50-60 Hz, <15W
Export units configured for country of destination
Dimensions (HWD) 1.75" x 19" x 6"
44.5mm x 483mm x 152mm
Weight 4.9 lbs. (2.2 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. Therefore, specifications are subject to
change without notice.
To Next Page
Loading...