EasyManua.ls Logo

Art PHANTOM II PRO User Manual

Art PHANTOM II PRO
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Two Channel 48 Volt Phantom Power Supply
Artcessories
User's Manual

Other manuals for Art PHANTOM II PRO

Question and Answer IconNeed help?

Do you have a question about the Art PHANTOM II PRO and is the answer not in the manual?

Art PHANTOM II PRO Specifications

General IconGeneral
BrandArt
ModelPHANTOM II PRO
CategoryPower Supply
LanguageEnglish

Summary

Important Safety Instructions

Read and Retain Instructions

Retain safety and operating instructions for future reference and heed all warnings.

Do Not Open Unit

No user serviceable parts inside. Refer all service work to qualified personnel.

Grounding Requirements

Connect only to properly grounded mains power; do not defeat grounding.

Environmental Protection

Protect from excessive dirt, dust, heat, vibration, and liquids.

Handling Precautions

Protect controls during transit and handle carefully to avoid injury or damage.

Servicing Guidelines

Refer all servicing requirements to qualified technical personnel.

Introduction to Phantom II Pro

Product Features

Balanced XLR Connectivity

Features balanced XLR inputs and outputs for professional audio connections.

Low Power Circuitry

Efficient CMOS circuitry for extended battery life with a 9V battery.

External Power Option

Can be powered by an external power supply for AC mains operation.

Rugged Construction

Durable extruded aluminum case with an easily accessible battery compartment.

LED Power Indicator

Includes an LED lighted On/Off switch to indicate power status.

Low Noise & Distortion

Incorporates low noise, low distortion circuitry for high-quality audio output.

Installation and Operation

Power Source Setup

Install a 9V battery or connect an external power supply; unit is protected.

Microphone Input Connection

Connect microphone to the front panel female XLR input.

Audio Gear Output Connection

Connect unit's male XLR output to audio gear's balanced input.

Second Microphone Setup

Repeat connection steps for a second microphone if required.

Powering On the Unit

Turn on unit via POWER button; LED indicates power is applied.

Phantom Power Conflict Management

Turn off phantom power on other equipment when using this unit.

Technical Specifications

Input/Output Connections

Female XLR (2) inputs and Male XLR (2) outputs.

Phantom Power Voltage

Provides 48 Volts DC typical phantom power.

Current Limiting Resistors

Features 6.98k Ohms (1%) resistors for current limiting.

Power Source Details

9V battery (Alkaline recommended) or 7.5-12V AC/DC external supply.

Current Drain Specifications

10 mA (no load) to 45 mA typical (full load, 2 mics).

Battery Life Expectancy

>10 hours with Alkaline battery under typical full load.

Physical Dimensions

Dimensions: 1.85 x 4.6 x 3.9 inches (47 x 117 x 99 mm).

Weight Information

Weighs 0.82 lbs / 0.37 kg.

Warranty Information

Limited Warranty (USA Only)

Product and components free from defects for three years from purchase date.

Warranty Exclusions

Excludes misuse, abuse, unauthorized alterations, or serial number tampering.

Manufacturer Design Rights

ART reserves right to change design without obligation to prior manufactured products.

Limitation of Liability

Not liable for consequential damages; state laws may vary.

Purchaser Reference Information

Space to record Date of purchase and Purchased from.

Service and Support

Troubleshooting Checklist

Verify unit power, cable connections, and cable condition before seeking service.

Request Return Authorization

Visit www.artproaudio.com, select 'Support', then 'Return Authorization Request'.

Packaging for Return

Pack unit in original carton or substitute; consider outer box for shipping.

Required Return Documentation

Include RA number, contact info, return address, problem description, and purchase receipt.

Related product manuals