Art PowerMIX III User Manual

Problem: How do you connect a CD player, a synthesizer and the
line output from a bass amp to a tape deck?
Solution: Use a simple stereo mixer. The PowerMIX III can accept
either mono or stereo signals and mixes them down to stereo
or identical L/R mono signals. Additionally, the PowerMIX III pro-
vides a headphone output with its own level control.
Specifications:
• Three input channels each with their own pan and level controls
• Three sets of 1/4”left and right unbalanced inputs
• The Right inputs may be used for mono signals
• A Master Level control regulates all 3 channels
• Left and Right unbalanced 1/4” Outputs
• The Headphone channel features dual, stereo 1/4”outputs so
that two headsets can be connected at once
• The Headphone Level control regulates both outputs
• Input Impedance: 10k ohms
• Output Impedance: 100 ohms
• Max. Gain = +27dB
• Max. Input Level: +30dB
• Max. Output Level: +13dB
• THD: <0.005%
• Power:12V DC (Adapter included)
• Dimensions: 5.625 x 3.75 x 1.75 inches (143mmx92mmx45mm)
• Weight:1.3 lbs. (590g)
Usage:
a.) Plug the AC adapter into the 12V DC input on the PowerMIX III
and plug the other end into a 120V AC wall socket.
b.) Plug your stereo signal sources into the separate L/R Inputs
on channels 1 to 3. Mono sources can be plugged into the
Right Input on any channel. It is not recommended that you
connect 2 mono sources to any one channel.
c.) Connect the L/R Outputs to the inputs on your mixer, tape
deck,PC,etc. with unbalanced, shielded patch cables.
d.) Connect stereo headphones to either of the Headphone jacks.
An additional set may be connected to the remaining jack.
Turn up the Headphone Level slightly.
e.) Adjust the channel Pan and Level controls for the desired mix
through headphones.
f.) Increase the Master Level control setting as required for
optimum signal level and clarity from the recording or PA
device (PC,cassette deck,mixer, etc.).
Creative audio solutions in cool little boxes.
ARTcessories
™
March 2003
PowerMIX III
Three Channel Personal Mixer
DESIGNED & DISTRIBUTED BY:APPLIED RESEARCH AND TECHNOLOGY • 215 Tremont Street • Rochester, New York 14608 • USA
For Customer Service,please call: 585.436.2720 • Email: cserve@artproaudio.com • www.artproaudio.com • ART-ARTcs-03/03
90 DAY
WARRANTY

Art PowerMIX III Specifications

General

Input Channels	3
Input Connectors	XLR, 1/4" TRS
Frequency	20 Hz - 20 kHz
Material	Metal
Controls	EQ
Output Connectors	1/4" TRS

Summary

Specifications

Input and Channel Configuration

Details the three input channels, pan and level controls, and unbalanced inputs.

Master and Output Capabilities

Covers master level control, unbalanced outputs, and mono input usage.

Headphone Features

Describes dual stereo headphone outputs and independent level control.

Technical Performance Metrics

Lists impedance, gain, max levels, and THD specifications.

Physical Dimensions and Weight

Provides the physical size and weight of the mixer.

Usage Instructions

Initial Setup and Power

Guides on connecting the AC adapter and power source.

Connecting Audio Sources

Explains how to connect stereo and mono signal sources to channels.

Output and Headphone Connections

Details connecting to external devices and stereo headphones.

Adjusting Mix Levels

Covers setting channel pan, level, and master level for desired output.