Need help?Do you have a question about the Art SGE MACHK II MULTI-EFFECTS and is the answer not in the manual?
General| Brand | Art |
|---|---|
| Model | SGE MACHK II MULTI-EFFECTS |
| Category | Recording Equipment |
| Language | English |
Describes how to connect audio and MIDI to the unit and input/output signal characteristics.
Details input level indicators, input level control, mix control, and output level control.
Explains the function of the numeric and graphic displays for modes and preset information.
Covers preset selection methods and the key button for switching operational modes.
Details how to engage bypass and control the mix of dry and processed signals.
Explains access to MIDI utilities, title editing, and input signal routing options.
Describes MIDI Enable, MIDI Channel, and OMNI Mode configurations.
How to edit the MIDI Program Table for preset recall via MIDI numbers.
Explains the MIDI merger function and the MIDI Event Monitor display.
How to adjust the LCD display's viewing angle for optimal legibility.
How to transmit presets and MPT data to other devices via MIDI.
Displays used memory and instructions for recalling factory presets.
Protects or allows editing of factory and user presets from overwriting.
How to remove effects from a preset and operate the sampler.
Saves current preset settings and adjusts effect parameters using buttons.
Configures the remote jack for bypass or program incrementing.
Assigns MIDI controllers to control preset parameters in real-time.
Views real-time MIDI data for troubleshooting and setup.
Introduces the six dynamic effect categories and their characteristics.
Details the Harmonic Exciter and Equalizer effect parameters and usage.
Covers parameters for Compressor, Limiter, and Distortion effects.
Details parameters for Expander/Gate and Line Equalizer effects.
Parameters for Low Pass Filter, Flanger, and Chorus effects.
Details parameters for Pitch Transposer and Panner effects.
Provides short and long mono digital delay effects parameters.
Describes different types of reverb effects and their parameters.
Parameters for Reverb-3 and various Gated Reverb types.
Details parameters for Tapped and Regenerated Digital Delay effects.
Provides parameters for Stereo Digital Delay effects.
Parameters for long stereo delay and sampler modes.
Combines sampling with pitch shifting capabilities.
Covers battery backup, software version, registration, factory reset, and contact info.
Explains the internal digital and analog signal processing.
Provides instructions and procedures for factory service.
Details "English-ed" and "Raw Data" display modes for MIDI events.
Guides on using the sampler and managing preset memory.
Views real-time MIDI data for troubleshooting and setup.
A list of MIDI controllers, their actual names, and controller numbers.
Specific continuous MIDI controllers and operational notes on MIDI events.
Step-by-step guides for creating, copying, and managing presets.
How to unlock factory presets for editing or overwriting.
Sequence to reinitialize the unit to original factory settings.
Demonstrates editing the MIDI Program Table for preset recall and sequencing.
Examples for bypass and program incrementing using the remote jack.
Step-by-step guide to assigning MIDI controllers to preset parameters.
Details presets, memory, bandwidth, and dynamic range.
Covers physical dimensions, power needs, MIDI settings, and connections.
To Next Page
