ART TCS Twin Compressor System
INSTALLATION
The TCS may be used in a wide variety of applications and environments.
In a rack-mountable, all-steel enclosure, the unit is designed for continuous
professional use. Mounting location is not critical. However, for greater
reliability we recommend that you not place the units on top of power amps
or other sources of heat. The tube circuitry needs about a minute to “warm
up” from a cold power up.
AC Power Hookup
The TCS has an internal power supply designed to operate at 115 VAC @
50 to 60 Hz. Units manufactured for use outside the United States of
America have been modified to comply with the required electrical
specifications.
Analog Audio Connections
Audio connections to and from the TCS are balanced XLR (Pin 2 = Hot (+),
Pin 3 = Cold (-), Pin 1 = Ground), balanced ¼” (Tip = Hot (+), Ring = Cold (-
), Sleeve = Ground) and unbalanced ¼” (Tip = Hot (+), Sleeve = Ground).
Safety Precautions
WARNING: To avoid the risk of shock or fire, do not expose this unit to
moisture. Refer all servicing to qualified personnel. Do not remove the metal
cover; there are no user-serviceable parts inside.
- -
6
To Next Page
Loading...