Artec Robo 2.0 - Using Artec Blocks; Connecting Artec Blocks; Using the Block Remover

7
UsingArtecBlocks
５
●Ifyouhavetroubleseparatingblockswithyourhands,tryusingtheBlockRemover.
Studs
●ArtecBlock'sspecialshapemeansyou'llhavetokeepthepositionofthestudsinmindasyoubuild.
ReadalongwiththeInstructionManualstoseewherethestudsshouldbe.
●RemoveArtecBlocksfromoneanotherbypullingthemstraightapart.
Forcingtheblockstobendmaybreakthem.
Damage
Pullapart
inthedirection
ofthearrow
②Pulltheblockout.
②Slidetheremoverandpull.
BlockRemover!
Useyour
BlockRemover!
Useyour
1
2
1
2
Ａ
Ａ
Ａ
Ａ
Andifyou'restillhavingtrouble...
Soyou'rehavingtroubletakingapartyourblocks...
①Usetheclawstopinchthebaseof
theblock.You'llhearapopasa
gapopens.
①Placetheupperpartoftheremover
(shownbyA)intothegapbetweenthe
blocks.