Artek CLE1200 Series User Manual

Variable ISI
Channel
C
C
L
L
E
E
1
1
2
2
0
0
0
0
Remote Command Manual
for
CLE1200-M2K, CLE1200-M2V
for firmware version 1.1
Rev
1.
1
December
2018

Artek CLE1200 Series Specifications

General

Brand	Artek
Model	CLE1200 Series
Category	Test Equipment
Language	English

Summary

Device Setup and Connectivity

Remote Interface Options

CLE1200 supports remote control via Ethernet and USB 2.0 interfaces.

Ethernet Configuration

Details Ethernet requirements, default IP address, and IP settings.

USB Driver Installation

Guide to USB system requirements and installing the necessary driver.

Programming Examples

Ethernet Python Sample Code

Provides Python code examples for remote control via Ethernet.

USB Python Sample Code

Provides Python code examples for remote control via USB.

Command Reference

Command Standards and Conformity

Explains command compatibility with IEEEStd488-2 and SCPI-1990 standards.

Dedicated Device Commands

Details specific commands for CLE1200 operation, including ISI:MODE, ISI:FREQ, ISI:IL.

IEEE Std488-2 Command Set

Lists and describes standard IEEE Std488-2 commands like *CLS, *ESE, *ESR?.

SCPI Command Reference

Details SCPI commands for status, error handling, and system configuration.

Operational Tips and Status

Guidance on startup vs *RST, trigger support, and command sequencing.

Error Code Reference

Customer Support Information