artemis сomoonents
manual
Foсus Braсket
Focus Braсket
Mounts
There are
four M4 thread
pairs
at the side to side
module to mount the
focus bracket.
They
also
a||ow to mount the
reсeiver at the rear of the side to side
module,
whiсh сan faсilitate
the
ba|anсing
of сameras
with very
heavy |enses.
Spirit
Bubble
Switсhing on
the Camera.Battery
il|uminates the bui|t-in spirit
bubb|e.
Focus Braсket
Тhe focus braсket serves
as mounting
support
of
foсus remote
reсeivers,
suсh
as Genio,
Vox, ARRI.
Note:
Use on|y
originaI sсrews and spaсer
sleeves supp|ied
by Saсhtler.
Too
long
sсrews
damage the
reсeiver
eleсtroniсs and the side
to
side
modu|e
meсhaniсs'
Mounting
the
GenioA/ox
Reсeiver
Before mounting the reсeiver on the
foсus braсket
you
have to remove the
15 mm
rod mount
braсket,
if
existing,
from the reсeiver'
Now
you
сan adjust
the receiver
3nd
mount
it
on
the focus braсket
with the
long ho||ow
sсrews.
17
Note:
P|ease use the b|aсk
pIastiс
spaсer s|eeves.
lf
you
don't
Want to use these spaсer sleeves,
you
will have to use shorter sсrews.
Wrong
screws
damage
the reсeiver!
Mounting
the ARRI Receiver
Remove the dovetаiI
mount
at
the ARRI reсeiver.
Mount the reсeiver on the
foсus
braсket
through the s|ot using
a 3/8'' sсrew.
I
To Next Page
Loading...