Artemis Cine - Page 23

Power
Supply
There are
up to three battery mounts
at the lower
sled
module to mount the available Anton Bauer,
PAG
and
V-Mount
batteries.
As the artemis
system
has
separated сirсuits for сamera and monitor
supply
you
must
a|ways use
two bafteries.
The separation
of
the сirсuits reduсes
noise in
the
video
signal and с|arifies
the
total running time
of
the individual
batteries.
Due to this
separation there
are
two
different сonsumer
groups.
The first
group
inс|udes video
signal
proсessing
сomponents, such as monitor, video
transmitter,
frame|ine
generators,
video distributer,
and
video
assists.
Тhe
seсond
group
enсIoses meсhaniсal
сonsumers, suсh as сamera, foсus remote, onboars lights,
ta|ly сontro|.
O
*o,",
For not
disturbing
these
separated cirсuits,
сonsumers
invo|ved in video
signal
proсessing
shou|d
not
be supp|ied by outputs that
are
intended
to distribute
power
to the сamera.
The Monitor-
Camera
battery
andlor
the
C-Battery distributes
power
to following outputs:
Lower
SIed illodule:
Monitor Out 12 VDC
Video Power
Out
't2
VDC
Reсorder |n /
out
12 VDс
Side
Тo Side Module:s
Video Power
Out
12 VDC
Тhe,,Gamera.Battery..
distributes
power
to fo||owing
outputs:
Lower
Sled Module:
Aux Power
out
12 VDс / Тa||y
out
Aur
Side
To
Side Module:
Aux Power
out
.|2
VDс / Тa||y
out
Camerа Power
out
12 VDс
&
24vDc
Foсus Power
out 12 VDC
Foсus
Power out
Camera
Тa||y
Sensor
In
Power out
Monitor Out
Video
&
Power
Out
й"=Ь'g
Reсorder |n/out
Aux Power & Tally
Out
tEo
21