To Next PageTo Next Page
Need help?Do you have a question about the ARTERRA WFCO WF-8900 Series and is the answer not in the manual?
Protects converter circuitry from damage caused by accidentally connecting the RV battery in reverse polarity.
Red LEDs on the DC fuse board indicate a blown fuse for specific circuits, aiding in troubleshooting.
The cooling fan speed is incrementally controlled by the current drawn from the converter, optimizing component cooling.
The unit automatically shuts down if internal temperature exceeds a critical point to prevent damage.
If output current exceeds maximum rating, voltage drops to maintain constant current, recovering when loads are reduced.
Details the DC fuse board's capacity, including high-current circuits (30A) and general-purpose circuits (20A).
Discusses AC breaker compatibility, recommending same-brand breakers for main (30A) and branch circuits.
Lists specific manufacturers and types of 30A circuit breakers tested and approved for main breaker use.
Lists specific manufacturers and types of 20A circuit breakers tested and approved for branch circuit use.
Explains the converter's automatic 3-stage charging (Bulk, Absorption, Float) to maximize battery life.
Provides steps to check the converter's output voltage at the battery using a voltmeter.
Guides on checking and replacing reverse polarity fuses when there is no DC output from the converter.
A diagnostic flowchart to help identify and resolve common issues with the WF-8900 Series Power Center.
Confirms the product's compliance with UL, cUL, and FCC Class B standards.
Details FCC Part 15 rules for Class B devices, addressing potential radio frequency interference.
Instructions for mounting the enclosure in an accessible area, ensuring adequate airflow for the cooling fan.
Guidance on wiring AC breakers, including the main 30A breaker and branch circuits using duplex breakers.
Steps for connecting DC loads to the fuse board, specifying fuse types and maximum ratings for circuits.
Illustrates the DC output terminals and describes connections for the battery and DC load wires.
Lists specific conditions and damages that are not covered by the product's limited warranty.
Outlines the required steps, forms, and contact information for submitting a warranty claim.
Provides contact details for consumers seeking warranty support or clarification on product issues.
General