E
E
E
E
4. Attaching the Piano to the Stand.
Step 1
Lift the piano onto its stand and
align the holes in the stand legs
with the holes on the bottom
of the piano.
Step 2
Insert the hand bolts (E) into each hole
to attach the piano to its stand as shown
in the insert picture.
Step 3
Finish assembly by covering the locking nuts
with Screw Caps (C).
If you have any questions about your piano please contact us toll free at:
888-998-9848
Virgin (VMI) is the Parent Company of Artesia Pianos
Virgin Musical Instrument Company
P.O. Box 2908
LA MESA, CA 91943
info@virginmusicalinstruments.com
www.virginmi.com
To Previous Page
Loading...