Need help?Do you have a question about the Artesia Harmony and is the answer not in the manual?
General| Brand | Artesia |
|---|---|
| Model | Harmony |
| Category | Racks & Stands |
| Language | English |
Lists components like barrel nuts, screw caps, bolts, piano, crosspiece, legs, and 3-pedal unit.
Insert two barrel nuts into the pedal crosspiece board for subsequent assembly.
Position barrel nut correctly to receive screw, ensuring proper fastening through pedal board.
Align threaded lugs of Pedal Board with holes at the bottom rear of the Stand Legs.
Thread Bolt Screws (D) through Stand Legs into the Pedal Board lugs.
Align threaded lugs of Cross Piece with holes at the top rear of the Stand Legs.
Thread Bolt Screws (D) through Stand Legs into the Cross Piece lugs.
Repeat the cross piece attachment operation on the other Stand Leg.
Lift piano onto stand, aligning holes in stand legs with holes on the bottom of the piano.
Insert hand bolts (E) into each hole to attach the piano securely to the stand.
Cover the locking nuts with Screw Caps (C) to complete the assembly.
To Next Page