13
information and to determine whether an inspection for proper foundation and
grounding is required before pouring the concrete slab.
• The spa warranty will be voided if an improper installation is performed.
Structural damage due to an inadequate or improper foundation is not
covered under warranty.
• Ensure ample space is provided for any required servicing, that equipment
access panels are not blocked and easy access to electrical panels or the RCD
is available. Installation of all spas must be in accordance with national, state and
local electrical codes and rules. A licensed Electrician must perform the
electrical installation of models without a preinstalled cord and conduct a
RCD test procedure in accordance with applicable codes and approved
building plans if required. Fixed wiring requires a disconnect device to be
incorporated into the wiring in accordance with national, state and local
electrical codes and rules. All Alpine spas are manufactured and tested to all
required codes and standards providing maximum protection against electrical
shock. Spa safety features may not operate properly due to improper wiring
and could result in risk of fire, electrical shock, injury, or death. In
accordance with all pertinent national, state and local codes and rules, all
metal components within the maximum specified distance must be bonded
and connected to the ground lug on the exterior of the spa control pack.
• Ensure the equipment compartment is in a location where it will not be damaged
by water infiltration due to drainage or constant exposure. Cover the equipment
compartment with a heavy screen if rodents are a problem.
Damage due to rodents is not covered under warranty.
To Next Page
Loading...
