40
Reminders
The Reminder Icon on the Settings Screen takes you to the Reminders screen.
Press “Reminders“ to turn the reminder messages (like “Clean Filter”) ON (Yes) or OFF
(No).
Cleanup Cycle
Cleanup Cycle Duration is not always enabled, so it may not appear. When it is
available, set the length of time Pump 1 will run after each use. 0-4 hours are available.
Setting it to 0.0 Hr keeps the Cleanup Cycles from running.
The Cleanup Icon on the Settings Screen takes you to the Cleanup Cycle screen.
To Next Page
Loading...
