Need help?Do you have a question about the Artesian Spas Santa Cruz and is the answer not in the manual?
General safety guidelines including reading instructions, child supervision, and proper electrical grounding.
Details essential electrical wiring practices, wire gauge, GFCI requirements, and conduit usage for spa installation.
Details dual service electrical configurations for 50Hz systems, including wiring and component connections.
Explains 3-phase service electrical configurations for 50Hz systems, covering wiring and component connections.
Describes single service IT electrical configurations for 50Hz systems, emphasizing no neutral wire.
Details 3-phase IT electrical configurations for 50Hz systems, focusing on wiring and neutral absence.
Provides guidelines for choosing an appropriate and safe location for installing the spa.
Instructions on inspecting the spa for debris and ensuring pump connections are secure before filling.
Detailed steps for filling the spa with water, including important notes about water temperature and checking for leaks.
Instructions for turning on the spa's power and initial system checks after filling.
Steps to confirm proper water circulation through the jets after the spa is powered on.
Step-by-step guide on how to manually prime the spa pump if water flow is not established.
Emphasizes the importance of proper water preparation for spa longevity and warranty.
Guides users on setting the current time on the topside controller display.
Instructions for controlling the spa's light, operating modes (Standard, Economy, Sleep), and activating jets.
Explains preset and optional filter cycle settings for automated spa maintenance and cleaning.
Details how to set the spa temperature and explains the automatic freeze protection mechanism.
Provides further explanations for diagnostic codes related to sensor issues, flow problems, and potential freeze conditions.
Step-by-step instructions for draining the spa, including safety precautions and proper procedures.
Provides instructions for cleaning spa jets to maintain optimal performance and appearance.
Details the process for removing, installing, and cleaning spa filters, including replacement frequency.
Explains the importance of chemical treatment for water sanitation, balance, and component protection.
Defines key terms related to water chemistry, such as Total Alkalinity and pH.
Continues the glossary of water chemistry terms, explaining concepts like Sanitizers, TDS, and Calcium Hardness.
Further defines terms related to water chemistry, including Bather Load, Bactericide, and Balanced Water.
Explains the importance of maintaining spa water pH between 7.2 and 7.8 for optimal sanitation and component protection.
Details the lifetime warranty coverage for the spa's fiberglass structure against defects.
Explains the five-year warranty for the spa's acrylic surface finish against defects like blistering or cracking.
Covers the warranty for electrical components like pumps, heaters, and topsides for three years.
Details the three-year warranty for all plumbing components, including piping, jets, and valves.
Outlines the one-year warranty for the spa cabinet against defects in material and workmanship.
Specifies warranty coverage for stereo components, including limited coverage for parts and labor.
Covers warranty terms for the ozonator (one year) and spa cover (one year).
Lists limitations, exclusions, and disclaimers that may void the spa's warranty coverage.
Identifies key internal spa components such as the spa pack, heater, and therapy pump.
General| Brand | Artesian Spas |
|---|---|
| Model | Santa Cruz |
| Category | Hot Tub |
| Language | English |
To Next Page