PREPARATION FOR MONTAGE
4
Do not place the mirror on a hard surface, since it can
damage the product.
Do not suspend the mirror on lighting profiles.
Do not suspend the mirror on pieces of furniture.
Do not suspend the mirror on the ceiling.
Correc t Incorrect
1.
2.
3.
4.
5.
6.
First, open the package. Remember not to place the mirror on a hard surface as this
may damage the product.
Check if the package contains all the elements (product received according to the
order, assembly elements).
Then take the mirror out of the packaging and place it on a soft surface (you can use
a folded towel for this).
Make sure the product doesn't have any scratches or damages.
Pay special attention to the corners of the mirror, check them first by removing the
protections. If necessary, contact us, do not mount the item with any damage.
For the assembly, secure the corners with the provided protectors again, remove
them only after hanging the mirror on the wall.
To Next Page
Loading...