7
10.
Then suspend the mirror on L-hooks.
11.
Once you suspend the mirror, remove protective film and plastic corners from
its surface
9.
In order to ensure that the mirror is fixed steadily, check whether L-hooks are
properly mounted in eyelets of adhesive hangers.
Make sure that electric power is disconnected
- disable the fuses!
INSTRUCTION FOR MOUNTING ON THE WALL
In order to connect it to the electrical grid,
use “Wago” connector.
However, do not forget to proceed according
with the rules relating to work with electric
installation or use help of an electrician.
WARNING!
To Next Page
Loading...