Need help?Do you have a question about the artisan RS-815E and is the answer not in the manual?
General| Connectivity | Wired |
|---|---|
| Number of Inputs | 8 |
| Number of Outputs | 8 |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 90% non-condensing |
Checks to perform before operating the equipment.
Safety guidelines during equipment operation.
Procedures for maintaining the equipment.
Use of dedicated power outlets and correct plugs is mandatory.
Importance of keeping ventilation openings clear.
Reminder to ensure proper ventilation as per guidelines.
Steps to connect power and turn on the unit.
Importance of ventilation for efficiency and longevity.
Ventilation requirements for upright cabinets with top condensers.
Ventilation requirements for bottom-mount condenser cabinets.
Ventilation requirements for under-bench cabinets.
Ventilation specifics for cake display cabinets.
Requirements for room ventilation for self-contained units.
Critical safety warning before cleaning.
Safety precautions and references for cleaning.
Importance and frequency of condenser cleaning for unit longevity.
Methods for cleaning the condenser fins.
Warnings against using corrosive cleaning agents.
Safety reminder for handling sharp edges.
How to change the temperature set point.
Specific instructions for top-mounted cabinets.
Initial step to access temperature settings.
Procedure to adjust and confirm the temperature.
Restriction on changing other parameters without authorization.
Steps for accessing settings on bottom-mounted units.
Adjusting temperature on bottom-mounted units.
Confirming and saving temperature settings.
Critical safety warning for troubleshooting.
Troubleshooting steps for a non-working unit with a cool compressor.
Identifies potential reasons for the compressor issue.
Steps to resolve the compressor issue.
Troubleshooting for units failing to maintain temperature.
Lists potential causes for temperature regulation issues.
Actions to take when the unit is not maintaining temperature.
Troubleshooting advice for water leakage issues.
Identifies reasons for water in the cabinet or on the floor.
Steps to resolve water leakage problems.
Troubleshooting steps for CLn alarm messages.
Explains the reason for the CLn alarm.
Actions to resolve the CLn alarm.
Safety precautions for cleaning, maintenance, and temp changes.
Electrical connection requirements for safety.
Routine cleaning procedure for heated displays.
How to change the temperature settings.
Initial step for changing temperature.
Procedure for adjusting temperature dials and limitations.
General warnings and safety precautions for wiring and installation.
Safety warnings for wiring and installation.
Safety warnings for installation and wiring.
Safety warnings for wiring and installation.
Safety warnings for wiring and installation.
To Next Page
