EasyManua.ls Logo

artograph LightTracer User Manual

artograph LightTracer
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.artograph.com
2838 Vicksburg Lane North, Plymouth, MN 55447-1878 U.S.A.
Phone: 763-553-1112 Fax: 763-553-1262
Toll-Free: 888-975-9555
The LightTracer
TM
by Artograph
Important Saftey Instructions
306-1523/09RP
When using this light box, always follow basic safety
precautions, including the following:
I. Read and understand all instructions before operating.
2. Supervision is necessary when used by or near children. Do not leave
unattended while in use.
3. Do not operate this equipment with a damaged cord, or if it has
been dropped or otherwise damaged, until it has been examined
by a qualifi ed electrician.
4. If an extension cord is necessary, be sure it has a suitable current rating,
Cords rated for less amperage than this equipment may overheat. Be
careful to arrange the cord so that it will not be tripped over or pulled,
5. Always unplug from the electrical outlet when not in use. Disconnect
by grasping and pulling the plug from the outlet; never yank the cord to
disconnect the plug.
6. Do not immerse in water. If the unit receives water damage, do not use
until inspected by a qualifi ed electrician.
Question and Answer IconNeed help?

Do you have a question about the artograph LightTracer and is the answer not in the manual?

artograph LightTracer Specifications

General IconGeneral
TypeLight Box
Dimensions12 x 18 inches
Light SourceLED
Power SourceAC Adapter
Work SurfaceTranslucent
Voltage120V
Color Temperature5000K
Adjustable ArmNo
Base TypeFlat
Brightness AdjustmentNot adjustable

Summary

Important Saftey Instructions

To Operate

Maintenance

Lamp Replacement

To remove bulb

Procedure to remove the light bulb from the unit by releasing spring tension.

To reinstall bulb

Procedure to insert a new light bulb into the unit and secure it.

Warranty