Need help?Do you have a question about the Artos 45-700 and is the answer not in the manual?
Turns main power on and off. Located on the back of the case.
Buttons used for machine operations like Run, Stop, Length, Quantity, Jog, Cut, and Program.
Key functionalities including Retained Memory, Wire Alarm, Wire Length Calibration, and Mode selection.
Instructions for entering the desired cut length for the wire.
Instructions for entering the desired number of pieces to cut.
Adjusts the feed speed of the wire through the machine for optimal performance.
Saves frequently repeated production job settings (length, quantity, etc.) up to 99 batches.
Retrieves previously stored production job settings from the machine's memory.
Allows adjustment of the cut length for improved accuracy.
Troubleshooting steps when the machine indicates a wire alarm, such as checking for jams or encoder wheel rotation.
Troubleshooting steps when the wire length is not accurate, including calibration and de-reeler checks.
Procedure to reset machine electronics when the display shows 'Calculating Cal Registers'.
Troubleshooting steps for cutter malfunctions, including checking for obstructions and electrical connections.
Steps to reset the machine electronics when no switches are functional.
Troubleshooting steps for continuous cutter cycling, focusing on the home sensor switch.
Troubleshooting steps for rough drive wheel operation, primarily checking for debris in gears.
Troubleshooting steps for cutters not cutting cleanly, including blade sharpness and pressure adjustments.
Troubleshooting steps for non-square cuts, involving feed tube selection and blade type.
Troubleshooting steps for tubing crushed by rollers, adjusting drive roller pressure.
Includes feed tube support set for 1/4" O.D. tubing.
Various internal diameter feed tubes for 1/4" O.D. tubing.
Various internal diameter feed tubes for 7/16" O.D. tubing.
Options for urethane or steel knurled drive wheels.
Accessory for use with wire processing equipment and 6" – 16" Dia. wire reels.
Accessory that fastens to the Wire Prepper® System II.
To Next Page
General