Need help?Do you have a question about the Artos CR.22 and is the answer not in the manual?
General safety guidelines for machine operation.
Identifies hazardous zones on the machine for safe operation.
Details on safety guard and interlock system functions.
Procedures for routine safety checks before operation.
Lists critical warnings and cautions for operator safety.
Introduction to the machine's operating software.
How to define and manage part processing parameters.
Step-by-step guide for operating the machine to produce parts.
Steps to initiate automatic production runs.
Guide to defining or modifying part processing setups.
Setting up processing steps for wire ends.
Setting up processing steps for wire ends.
Configuring crimping parameters for terminating units.
Setting up pre-processing steps like marking.
Using the CFM system for quality control.
Managing job lists for batch or harness production.
Organizing and managing machine data files.
Setting up and running quality checks on parts.
Step-by-step guide for running qualification tests.
Using a scanner for data entry and validation.
Configuring and using material verification.
Guidelines for maintaining the machine.
Procedures for installing the machine.
General| Brand | Artos |
|---|---|
| Model | CR.22 |
| Category | Power Tool |
| Language | English |
To Next Page
