4) Incline angle adjustment To adjust the incline angle of helmet relative to the
welder’s face, and adjust the height of welder’s eyes relative to filter lens.
. This model is designed & equipped with a special turnover (up & down) headband
mechanism. When welder turns over the helmet to welder’s head top, the headband
mechanism makes helmet’s gravity center to be more lower, and be coincided with the
center of welder’s head. The design of welding helmet greatly lowers the fatigue of
welder’s head ( & neck ) and make welder feel more comfortable than before while at
working.
. Headband has been set unevenly and there is an uneven distance from the eyes to the
filter's lens (Reset headband to reduce the difference to filter.
6. SPARE PARTS LIST
Item 1: Helmet shell Item 2: Auto darkening filter
Item 3:Complete headband Item 4: Headband knob
Item 5: Front cover lens Item 6: Inside cover lens
To Next Page
Loading...