What to do if Artsauna Kiruna Plumbing Product heat cabin does not heat up?
If your Artsauna Plumbing Product heat cabin isn't heating up properly, there are a few potential causes. First, ensure the power cable is securely plugged in. Next, verify that the temperature setting isn't too low and that all radiant heaters are working. If a radiant heater is defective, contact customer service.
Why does Artsauna Plumbing Product control unit display show 'H'?
The 'H' on your Artsauna Plumbing Product control unit display means the temperature sensor has detected a temperature exceeding 75°C. You should check the temperature inside the heat cabin and lower it if needed. If the issue continues, contact customer service.
How to fix Artsauna Plumbing Product light that does not turn on?
If the light on your Artsauna Plumbing Product isn't turning on, it could be due to a power interruption. Make sure the power cable is properly plugged into the socket. If the issue persists, the illuminant may be defective, and you should contact customer service.
What to do if Artsauna Kiruna Plumbing Product control unit display shows EE?
The 'EE' displayed on your Artsauna Plumbing Product control unit indicates a temperature sensor malfunction. Contact customer service for assistance.
General| Product Type | Sauna |
|---|---|
| Material | Wood (Nordic Spruce) |
| Dimensions | 2000 x 2000 x 2100 mm |
| Capacity | 4-6 people |
| Heating Source | Electric |
| Power Consumption | 6 kW |
| Warranty | 2 years |
To Next Page