Aruba 310 Series Access Points
Installation Guide
XXX-IG-0X | Month Year 1
Aruba 310 Series access points (AP-314, AP-315, IAP-314, and IAP-315) support IEEE 802.11ac standards for a
high performance WLAN. This device is equipped with two single-band radios that provide network access and
monitor the network simultaneously. These access points deliver high-performance 802.11n 2.4GHz and
802.11ac 5GHz functionality, while also supporting 802.11a/b/g wireless services. Multi-user Multiple-in,
Multiple-output (MU-MIMO) is enabled when operating in 5GHZ mode for optimal performance.
The AP-314 and AP-315 work in conjunction with an Aruba controller, while the IAP-314 and IAP-315 can be
configured via the built-in virtual controller.
The Aruba 310 Series provides the following capabilities:
IEEE 802.11a/b/g/n/ac operation as a wireless access point
IEEE 802.11a/b/g/n/ac operation as a wireless Air Monitor
IEEE 802.11a/b/g/n/ac operation as a Spectrum Analysis
Compatible with IEEE 802.3at PoE+ power sources
Compatible with IEEE 802.3at PoE power sources
Support for MCS8 and MCS9
Centralized management, configuration, and upgrades
Integrated Bluetooth Low Energy (BLE) radio
Centralized management, configuration, and upgrades
Package Contents
The following materials are included with this product:
Aruba 310 Series access point
9/16” and 15/16” Ceiling Rail Adapters
Hardware Overview
The following sections outline the hardware components of the 310 Series access point.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.
To Next Page
Need help?
General
