EasyManua.ls Logo

ASA Electronics Jensen JWM12A User Manual

ASA Electronics Jensen JWM12A
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Mode Menu
Back
Forward
Volume Control
Audio Menu
Power
App Info Play/Pause/Mute
App download and operation:
jControl app controls all of
the primary fu nctions of the
JWM12A directly from your
phone or tablet. It can be
found by searching for
After downloading and installing app, pair
your device to the JWM12A as instructed
in “Bluetooth Operation” section in this
guide. Once your device is paired, open
the app and use as instructed. (Device
must be paired to JWM12A before
opening and using app).
Tablet Interface
JWM12A
QUICK REFERENCE GUIDE
Basic Operation
AM/FM Tuner Controls
App Control
AS/PS: Press to SCAN through
currently stored presets. Press &
hole to STORE strongest broad-
cast stations in your area.
BAND: Press to select between two AM
BANDS (AM1, AM2) & three FM
BANDS(FM1,FM2,FM3).
STATION STORE PRESETS:
Press & hole to store current
station. Press once to recall stored
channel.
NOTE: Up to 18 FM & 12 AM
channels can be stored.
VOLUME: Press the VOLUME UP
(M)button to increase volume
or Press the VOLUME DOWN
(H) button to decrease volume.
MODE: Press repeatedly until you
reach TUNER mode displayed as
a frequency.
TUNE/SEEK/TRACK: Press >>
button to tune frequency higher.
Press << button to tune frequency
lower. Press and hold to scan to
next strongest station.
|
|
POWER/MODE: Push to turn on.
Press to cycle through sources.
Press & hold to turn OFF and
enter standby mode.
AUDIO/SETTINGS: Press to
bring up AUDIO ADJUSTMENT
options: BASS, TREBLE, &
BALANCE (left to right).
Press & hold to bring up SETTING
MENU options: BLUETOOTH
(ON/OFF), BEEP, ADJUST LCD
BRIGHTNESS, PRESET
VOLUME and RESET. Press
VOLUME UP/DOWN buttons will
adjust each SETTING option
except 'RESET'.
AUX IN: Insert 3.5mm cable from
your portable media device.
RESET: Use a ball point pen or
thin metal object to press the
reser buttons.
BACK: Press to exit any menu.
ZONES OUTPUT: Press any zone button
(ZONE A and ZONE B) to control
corresponding speaker output from the
radio, SPK A, SPK B will appear on the
display.
VOLUME: Press the VOLUME UP (M)
button to increase volume or Press the
VOLUME DOWN (H) button to
decrease volume.
MUTE: Press to MUTE volume.
Press again to resume volume.
JENSEN jControl”.
Question and Answer IconNeed help?

Do you have a question about the ASA Electronics Jensen JWM12A and is the answer not in the manual?

ASA Electronics Jensen JWM12A Specifications

General IconGeneral
TunerAM/FM
Number of Channels4
USB InputYes
Auxiliary InputYes
BluetoothYes
ClockYes
TouchscreenNo
Compatible with Rear View CameraYes
TypeStereo
Playable MediaMP3, WMA
Output Power200W

Summary

Basic Operation Controls

Power and Mode Control

Controls power, source cycling, and standby mode.

Audio and Settings Adjustments

Accesses audio settings (bass, treble, balance) and system settings.

Auxiliary Input

Connects a portable media device via 3.5mm cable.

Volume and Reset Functions

Adjusts volume, resets the unit, and controls speaker zone output.

Navigation and Exit

Exits the current menu or function.

App Control and Operation

Smartphone App Integration

Controls unit functions via the jControl smartphone app.

AM/FM Tuner Functions

Tuner Mode and Band Selection

Selects tuner mode and cycles through AM/FM broadcast bands.

Preset Scan, Store, and Recall

Scans for stations and stores/recalls presets.

Tuning, Seeking, and Muting

Tunes frequencies, seeks stations, and mutes audio.

Bluetooth and Clock Features

Bluetooth Mode and Device Pairing

Accesses Bluetooth mode and pairs devices via Bluetooth.

Phone Call and Audio Control

Handles incoming calls and controls Bluetooth audio playback.

Clock and Alarm Setup

Sets the clock time, alarm time, and sleep timer.

Related product manuals