Asahi Seiko SH-400 - User Manual

Asahi Seiko (Europe) Ltd Product Information
SH-400F Technical Information Page 1
Issue 1 September 2000
SH-400 FLEXIBLE DISC HOPPER
Warning: This product contains unprotected moving parts and is intended for
inclusion within a host machine. Manufacturers responsible for incorporating this
sub-assembly within a host machine must observe installation and safety
instructions detailed in section 3.3

Summary

2.0 General Specification

2.4 Installation

3.0 Operation and Maintenance

3.1 Removing;Replacing the Hopper Bowl

3.2 Removing;Replacing the Coin Disc

3.3 Safety And Maintenance

Crucial safety guidelines and routine maintenance procedures for the hopper.

4.0 Electrical Information

4.1 Connector Details

4.2 Pin Functions

Lists and describes the function of each pin on the hopper connector.

4.3 Electrical Characteristics

Details power supply requirements and operating parameters.

4.4 Control

Explains how to control the operation of the hopper unit.

4.5 Payout Sensor Specifications

Provides technical details for the payout sensors used.

4.5.1 Optical Type

Specific characteristics and circuit details for the optical sensor option.

4.5.2 Proximity Type

5.0 Calibration Instructions

5.1 General

5.2 Disc adjustment to suit coin diameter

5.3 Disc Height Adjustment

5.4 Coin Guide and Output Roller Adjustment

6.0 Parts Identification

Asahi Seiko SH-400 Specifications

General

Brand	Asahi Seiko
Model	SH-400
Category	Cash Counters & Coin Sorters
Language	English