AsahiKASEI MICROZA UNA Series User Manual

7
2. Spec
2.1 Module Standard Specification
Item
UNA-600A
UNA-660A
UNA-620A
Membrane Material
High-bonding network structured polyvinylidene fluoride
Effective membrane area
(outer surface (m
2
))
23
40
50
Performance
Nominal pore size (micro meter)
0.1
0.1
0.1
Use Conditions
Max. feed pressure (kPa)
300 *
1
300 *
1
300 *
1
Max. TMP (kPa)
300
300
300
Max. Temperature (°C)
40
40
40
pH Range
1 - 10*
2
1 - 10 *
2
1 - 10 *
2
Parts Material
Housing
ABS resin
ABS resin
ABS resin
Potting resin
Polyurethane
Polyurethane
Polyurethane
Gasket, O-ring
EPDM
EPDM
EPDM
Dimensions (mm)
Use of End cap B at both ends
1.314L × φ165
2,018L × φ165
2,418L × φ165
Use of End caps B and A at
upper and lower ends
respectively
1,234L × φ165
1,938L × φ165
2,338L × φ165
Weight (kg)
Filled with water
30
50
60
Without water
15
25
30
*1
Consult Asahi Kasei for system operation under a pressure of up to 400kPa.
*2
See Section 9.1.1 "Contaminants and Applicable Cleaning and/or Disinfecting Agents" for
chemical cleaning.
See Section 7. "STANDARD OPERATING PARAMETERS FOR THE UNA SERIES" for the
details of operating parameters.

AsahiKASEI MICROZA UNA Series Specifications

General

Brand	AsahiKASEI
Model	MICROZA UNA Series
Category	Control Unit
Language	English