Need help?Do you have a question about the asalvo baby STROLLER MIT and is the answer not in the manual?
Release the folding hook and spread up the frame until it is fully spread and locked.
Attach front wheel set to the frame leg until it stops, ensuring the lock mechanism is engaged.
Push rear wheel axle onto tubes until buttons lock, then press center button to fix.
Secure front bumper by connecting ends to tubes and locking mechanisms. Unlock to remove.
Press buttons to adjust front bar height; maintain middle position during use.
Lift the steel bar on the backrest and position it as needed.
Simultaneously press side buttons to adjust the footrest to the desired position.
Release side lock, press handle buttons, then squeeze and lock the hook to fold.
Engage brakes by stepping on lever; release by lifting it.
Rotate the lock system to control the swivel function of the front wheels.
Press the central button on the front wheel assembly to release them.
Press the button at the rear wheel's center to remove it from the axle.
Buckle parts until they click, adjust length, and press buttons to release. Always use.
Read instructions, use for age/weight limits, never leave child unattended, secure locks.
Use for single baby, stop/lock before mounting, avoid stairs, no extensions, check locks.
General| Foldable | Yes |
|---|---|
| Wheels | 4 |
| Brakes | Yes |
| Harness | 5-point |
| Storage Basket | Yes |
| Material | Polyester |
| Sun Canopy | Yes |
To Next Page